The advantages of the Core Board STM8S003F3P6 STM8 Development Board is that it is a minimum system board or development board that has the microcontroller already soldered along with a PWR and configurable led and a RESET Button. The board uses 2.54” pin pitch on the board to solder standard berg pins and connect it with berg wires or place it in the Breadboard which becomes troublesome if you use the MCU only.

This mini development board uses 5V input through pins and the PWR LED immediately notify the power availability status. The RESET Button can be used for resetting the microcontroller unit and the LED that is connected on the PB5 of the microcontroller unit can be configured using firmware by the user, making it easy to test.

However, the programming interface is made in the top side of the board and available separately where the RST, GND, SW and 5V connection is available. Clear identification of the board pinout is useful for fast interfacing and identification of the pins. I2C lines require pull-up resistors. This board enables 4.7k pull up on both I2C lines SDA and SCL, connected in the bottom of this board.

Note: Color of Product may be differ from the picture shown here.

STM8S003F3P6 Development Board pinout:

STM8S003F3P6 Development Board Specifications:

1. Available controller STM8S003F3P6
2. On board RESET Switch available
3. 54” pin spacing.
4. 5V operation voltage that is directly connected with mcu VCC
5. Power LED and user configurable LED is available.
6. High quality PCB
7. 7k Pull up on I2C lines available.

STM8S003F3P6 Development Board Applications:

• Development Board or Programming board for STM8S
• Driver Board for I2C based Sensors
• Data logging and Data acquisition
• Analog Sensing 
• Small control related application.

STM8S003F3P6 Development Board Dimension and footprint:

Example Projects on STM8S003F3P6 Development Board:

Getting started with STM8S

Additional Resources:

STM8S003F3P6 Datasheet

Package Contains

1x STM8S003F3P6 Development Board